Visca CONTROL/VIDEO/POWER CABLE EXTENDER Sony Canon Pan Start Price USD 119.95 Current Price USD 119.95 Time Left 10 days 2 hours 8 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Monday, October 20, 2008 End Time Sunday, January 18, 2009 Location Sacramento, CA See more about 'Visca CONTROL/VIDEO/POWER CABLE EXTENDER Sony Canon Pan' Description Features: This cable set connects any RS-232 Visca controlled Pan/Tilt/Zoom camera to the serial port and video input of any DVR/PC. It also supplies the camera with power. This cable can be extended up to 100=150Ft with any CAT5/CAT5E/CAT6 UTP network cable. The cable set works with all known DVR software such as GeoVision, Anykeeper, Kodicom, DigiFlower, Pico, Avermedia, HikVision, etc.  Cable works with these cameras: SONY--------------EVI-D30,  EVI-D31,  EVI-D70,  EVI-D100,  BRC-300,  SNC-RZ30. CANON-----------VC-C1, VC-C3,  VC-C4,  VC-C4R,  VC-C50i.  PANASONIC-----KX-DP602, KX-DP702, KXC-CM780, KXC-CM775SO. Other available Visca/Daisy Chain Cable Extenders: >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   Video Specifications: Bandwidth                             DC to 6 MHz. Impedance                            75 Ohms. Maximum Input                     1,2 V p-p. Insertion Loss                        < 2 dB. Return Loss                           15 dB or better. Common Mode Rejection      > 40 dB. Connectors on camera side:  DIN8 control in male plug. RCA Video male plug. EIAJ-4 power plug (OD-5.5mm; ID-3.3mm; Pin-1mm).  RJ45 jack for UTP cable extension. Connectors on PC/DVR side:  DB9 female plug. RCA Video male plug. EIAJ-4 power jack for EIAJ-4 plug (OD-5.5mm; ID-3.3mm; Pin-1mm).  RJ45 jack for UTP cable extension. Package contains: 2 Baluns with control, video, power cables. Link to the free software to control PTZ cameras locally and over the internet.    Visit our Store for our NEW USB Visca Control Cables! Place a Bid!