Visca CONTROL/S-VIDEO/POWER CABLE EXTENDER Sony Canon Start Price USD 129.95 Current Price USD 129.95 Time Left 9 days 23 hours 40 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Monday, October 20, 2008 End Time Sunday, January 18, 2009 Location Sacramento, CA See more about 'Visca CONTROL/S-VIDEO/POWER CABLE EXTENDER Sony Canon' Description Features: This cable set connects any RS-232 Visca controlled Pan/Tilt/Zoom camera to the serial port and S-Video input of any DVR/PC. It also supplies the camera with power. This cable can be extended up to 100=150Ft with any CAT5/CAT5E/CAT6 UTP network cable. The cable set works with all known DVR software such as GeoVision, Anykeeper, Kodicom, DigiFlower, Pico, Avermedia, HikVision, etc.  Cable works with these cameras: SONY--------------EVI-D30,  EVI-D31,  EVI-D70,  EVI-D100,  BRC-300,  SNC-RZ30. CANON-----------VC-C1, VC-C3,  VC-C4,  VC-C4R,  VC-C50i.  PANASONIC-----KX-DP602, KX-DP702, KXC-CM780, KXC-CM775SO. Other available Visca/Daisy Chain Cable Extenders: >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   Video Specifications: Bandwidth                             DC to 6 MHz. Impedance                            75 Ohms. Maximum Input                     1,2 V p-p. Insertion Loss                        < 2 dB. Return Loss                           15 dB or better. Common Mode Rejection      > 40 dB. Connectors on camera side:  DIN8 control in male plug. S-Video male plug. EIAJ-4 power plug (OD-5.5mm; ID-3.3mm; Pin-1mm).  RJ45 jack for UTP cable extension. Connectors on PC/DVR side:  DB9 female plug. S-Video male plug. EIAJ-4 power jack for EIAJ-4 plug (OD-5.5mm; ID-3.3mm; Pin-1mm).  RJ45 jack for UTP cable extension. Package contains: 2 Baluns with Control, S-Video, and Power cables. Link to the free software to control PTZ cameras locally and over the internet.    Visit our Store for our NEW USB Visca Control Cables! Place a Bid!