USB VISCA CONTROL/VIDEO/POWER CABLE EXTENDER Sony Canon Start Price USD 139.95 Current Price USD 139.95 Time Left 2 days 3 hours 12 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Sunday, October 12, 2008 End Time Saturday, January 10, 2009 Location Sacramento, CA See more about 'USB VISCA CONTROL/VIDEO/POWER CABLE EXTENDER Sony Canon' Description This USB Extender connects any Visca controlled Pan/Tilt/Zoom camera to the USB port of any PC or Laptop. USB Visca CONTROL/VIDEO/POWER cable set can be extended to 100-150Ft with any CAT5/CAT5E/CAT6 UTP network patch cable. Cable set works with these cameras: SONY--------------EVI-D30,  EVI-D31,  EVI-D70,  EVI-D100,  BRC-300,  EVI-G20. CANON-----------VC-C1, VC-C3,  VC-C4,  VC-C4R,  VC-C50i.  PANASONIC-----KX-DP602, KX-DP702, KXC-CM780, KXC-CM775SO. Other available USB extenders and cables: >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >   >    Our USB to VISCA converters create virtual serial ports on USB DATA BUS and any PTZ or DVR software can use created serial ports for PTZ camera control. Unlimited number of PTZ cameras can be connected to one PC or Laptop and controlled simultaneously. Features: Video from the camera can be connected to any PC capture device, DVR, VCR, TV, Monitor, or Videoconferencing system. Power to the camera is supplied over the same cable run. This cable works with all known DVR software such as GeoVision, Anykeeper, Kodicom, DigiFlower, Pico, Avermedia, HikVision, etc. USB to Visca converter works with Windows 98, ME, 2000, XP, Vista. No external power required for USB to Visca converter. Video Specifications: Bandwidth                             DC to 6 MHz. Impedance                            75 Ohms. Maximum Input                     1,2 V p-p. Insertion Loss                        < 2 dB. Return Loss                           15 dB or better. Common Mode Rejection      > 40 dB. Connectors on camera side:  DIN8 control male plug. RCA Video male plug. EIAJ-4 power plug (OD-5.5mm; ID-3.3mm; Pin-1mm).  RJ45 jack for UTP cable extension. Connectors on PC/DVR side:  USB control male plug. RCA Video male plug. EIAJ-4 power jack for EIAJ-4 plug (OD-5.5mm; ID-3.3mm; Pin-1mm).  RJ45 jack for UTP cable extension. Package contains: Two extenders (transmitter and receiver) with control, video and power connectors. Drivers for Windows 98, ME, 2000, XP, Vista. Manual for USB extender installation. Link to the free software to control PTZ cameras locally and over the Internet.  RS232 Serial Visca Control Cables! Control Cables for SONY RM-BR300 controller! Control Cables for TELEMETRICS controllers! Place a Bid!